FireNet Community
September 19, 2018, 06:04:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: It is with deep regret that the Webmaster, Colin Simpson, and I have to inform the forum that Alan Kurnatowski (Kurnal) passed away on the 17th April.
Colin T & Colin S have provided an obituary in the fire safety forum
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: 3 flats above shop  (Read 700 times)
massive1969
Newbie
*
Posts: 18


« on: July 29, 2018, 08:35:10 AM »

Good old flats above shops saga...

Retail unit ground and basement.
3 storeys above each with 1 flat.
Height of highest floor of building <18m.

Building built circa 1850's.

Standard construction (Bricks, mortar, stone, slate, tiles, etc.)

60min separation between shop & flat.
60min separation between basement & ground floor shop.
Timber stair has been underdrawn.
Separation between each flat - uncertain at this stage...looks to me like timber tongue and groove floors but ceilings have been underdrawn with gyproc plasterboard.

AFD (Part 1) in shop which has been extended to stairway of flats at bottom and top of stair.
AFD (Part 6) Grade D in each flat (smoke) with heat detector in kitchen linked to building fire alarm system.

There is independent access to the flats which is a single stairway which is only means of escape. This discharges on to the street. Shop has its own independent entrance/exit.

Looking at guidance, which says...

Several flats over a shop (3+ storeys) - 30 minute fire doors to each flat door. 60 minutes between floors. Internal doors should also be fire resisting thus giving a 60 minute fire resistance between the flats and the staircase. Clear exit route out to a place of safety.

The design of the building is such that there is only one door leading to/from each flat i.e. not a lobby approach.

So, using this as guidance, should the flats each have a FD60s door as there is no internal door as such?? Including the top flat?? Or will FD30s suffice?

If it helps, they are immediately opposite a manned Fire Station!
Logged
AnthonyB
Firenet Extinguisher Expert
Hero Member
*****
Posts: 2219



WWW
« Reply #1 on: July 29, 2018, 07:49:17 PM »

Looks like it's set up for full evacuate due to layout/structure and could also have been subject to Section 257 Additional licensing depending on where it is, certainly sounds like a LACORS guide type approach has been used.

One FD60S does not perform as well as two lobbied FD30S doors from a smoke control point of view. If you have full evacuate already you have to ask does it matter as much if you only have the single FD30S door from a point of view of the protection of relevant persons for Fire Safety Order purposes or not - will a fire affect the escape before alarm and evacuation (possible different ball game if considering the flats layout for HHSRS purposes). Is the common AFD in the flat just the kitchen heat detector and nothing in the vicinity of the front door? 

The problem with a lot of these set ups is they don't quite fit the guides, hence the need for individual risk assessment - I assume you've had an intrusive survey so you can be assured of the FR, it's a nightmare with these types to know the best approach if you aren't sure of the build and it's condition.
Logged

Anthony Buck
Fire Safety Technical Lead at a BAFE SP205 accredited consultancy

Extinguisher/Fire History Enthusiast

Fire Extinguisher Facebook Group:
http://www.facebook.com/group.php?gid=65...415&ref=ts
http://www.youtube.com/user/contactacb
https://uk.linkedin.com/in/anthony-buck-36b9572
GM
Newbie
*
Posts: 7


« Reply #2 on: August 01, 2018, 12:26:27 AM »

What is the actual internal layout of each flat does it have an internal hallway with each room opening direct into this hallway?
If the flat directly above the shop has a floor level of max 4.5m above ground level could rely on escape windows? to this flat and you would hope that the flats above would have an internal protected corridor and a fd30 entrance door which would give the required protection? to allow others to escape but also  protect the occupants of the flat itself
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!